Bats in Buildings:
Proper Exclusion Techniques in New Mexico
Revised by Jon Boren, Extension Wildlife Specialist
College of Agricultural, Consumer and Environmental Sciences, New Mexico State University
Bats are unique and interesting animals. They also are among the most misunderstood mammals in New Mexico because of fears and misconceptions about them.
Bats belong to the mammalian order Chiroptera, which means "hand-wing." While flying, most bats navigate by echolocation, a process for locating distant objects by sending out sound waves that bounce off objects and return back to the bat. An impressive diversity of bats is found around the world; Chiroptera is the second largest order of mammals, with more than 1,000 species (only the order Rodentia contains more).
A few species of bats are solitary, but most congregate
in groups or colonies. They leave their
roosting places at dusk to fly about in pursuit of
insects, which make up the bulk of their diet. Some
bats migrate with the change in seasons, following
the food supply. Others remain in New Mexico, hibernating
only during the colder months.
Almost all bats found in New Mexico are beneficial and of some economic importance. Most bats are insectivorous and may consume more than onehalf their body weight in insects each night. A large colony can eat literally tons of insects annually. Some bat species pollinate trees and cacti, providing a service similar to that of bees; bats pollinate some species of agave in New Mexico.
Despite their immense value, problems sometimes arise when bats enter buildings, and it may be necessary to use control measures.
Originally, bats roosted in natural shelters such as
caves and hollow trees. Many still do, but others
have found human dwellings much to their liking.
Attics, spaces between walls, and unused areas in
upper stories of buildings all make good roosting sites for bats. Although bats rarely do actual damage
to dwellings, their presence is usually objectionable.
Bat droppings and urine create a highly
undesirable odor. If not cleaned thoroughly, this
odor can persist for a long time and could attract
additional bats. A naturally occurring soil fungus,
Histoplasma capsulatum, is sometimes present in bat
and bird droppings. Inhalation of the fungal spores
can lead to histoplasmosis, a respiratory disease
with symptoms similar to influenza. A HEPA respirator
should be worn while cleaning large quantities
of bat or bird droppings in a confined area to avoid
inhalation of fungal spores that may become airborne
when droppings are disturbed.
Noise is another problem often encountered with bats inside dwellings. A group of bats can create substantial noise by crawling and squeaking. This noise can be quite disturbing to humans.
Bats, like other mammals, can transmit the rabies virus to humans if they are infected. However, only a small percentage of bats are infected, and bat rabies accounts for an average of less than one human death per year in the Unites States (Bat Conservation International, 2006). Clearly, bats do not rank very high among mortality threats to humans. Nevertheless, prudence and simple precautions can save lives. Any bat acting in an abnormal manner should be approached with caution and not handled, particularly if found fluttering on the ground.
Before attempting to control bats, it is essential
to verify that bats are actually the cause of the
nuisance. For example, scratching or thumping
sounds in the attic or walls could indicate the presence
of birds, rodents, squirrels, raccoons or other
The only way to permanently rid a building of bats is to eliminate all possible entrances. It must be emphasized that repellents and traps are not permanent control methods. Bat-proofing a building is the only efficient and permanent way to eliminate bat problems.
Bat Proofing Buildings
Bats may enter buildings through openings such as
louvers, vents, broken windows, worn-out siding
or holes around eaves and cornices. Other problem
areas are faulty ridgevents, crevices in the soffit
and fascia, chimneys that have slumped away from
buildings, loose flashing, and the interiors of abandoned
chimneys (John Chenger, personal communication).
Smaller bat species can crawl through
slits as narrow as 3/8 of an inch. Therefore, it is essential
to seal all openings 1/4 inch or larger.
Bats should not be excluded from roosts when females are raising pups, generally May through August in New Mexico. Mothers often leave young bats in the roost when foraging at night. If bats are excluded during this time, the pups will be inadvertently trapped inside the roost. Some bats hibernate in buildings during the winter months. Winter exclusions should be performed only if it can be determined that no bats are hibernating in the building. If bats are present during the winter months, exclusions should be postponed until the spring (Bat Conservation International, 2006).
The first step in any bat exclusion process is to examine the building to determine where bats are entering and exiting the roost. Look for brown stains at the roost openings during the daytime. These are caused by oils on the bats' fur rubbing off on the outside surface of the building. Also look for black guano (droppings) beneath roost openings. Generally, most occupants will leave the roost at dusk and within 30 minutes after the first bat exits, although bats may leave the roost at any time during the night. Observing the building within an hour after dusk is the best way to locate openings used by bats as they fly out. If bats have been recently disturbed, keep in mind that their routine may be temporarily disrupted.
The next step is to screen all potential openings with lightweight polypropylene netting (<1/6-inch mesh) fastened in a way that allows bats to escape but not re-enter. This netting is readily available as window-screen material at any home improvement store—do not use wire screening as it is not flexible. The top of the flexible netting is affixed to the building at the roost exit and draped down a couple of feet below the opening (Figures 1 and 2). This serves as a one-way door: bats will exit the roost and crawl down and out from under the screen, but when they return and attempt to land, their re-entrance is blocked by the screen. Leave the netting up for 5–7 days, and observe the bats exiting at night to see that progressively fewer bats are leaving each night and to ensure that they are not simply using alternative openings.
Figure 1. Using netting to exclude bats.
Figure 2. Bat exclusion screen.
Once all bats are gone, the remaining holes can be sealed permanently. Construction adhesive or caulking can be injected in cracks, crevices or any smaller entrances. Construction adhesive dries brown and may be painted over. Larger crevices may need to be stuffed with fiberglass screening as fill before being caulked over (John Chenger, personal communication). Large openings should be covered with sheet metal or with 1/4-inch mesh hardware cloth if ventilation is necessary. Foam is very messy to work with and can kill animals that come into contact with it; it should only be used in very complex or hard-to-reach areas. Bats, unlike rodents, will not chew their way back into a roost.
Occasionally, temporary control can be accomplished
by using chemical repellents. Aerosol dog
and cat repellents may discourage bat use of a particular
roosting spot or prevent bats from nightroosting
above porches (Bat Conservation International
2006). The spray should be applied by day
when bats are not present. However, aerosol repellents
are not an adequate substitute for exclusion
in the case of day roosts.
Exclusion using one-way netting is a much more effective and permanent solution, although repellent techniques can sometime be used while bat-proofing is underway.
Occasionally, a single bat may get into the living area of a house or building. Although this can be both disturbing and alarming, the bat will often leave at dusk if doors or windows are left open and lights are turned off. If they refuse to leave, they can be captured with a net or a small box. Simply approach the bat quietly, place the container over the bat and slide a rigid sheet of paper between the wall and the lip of the container (Figure 3). This paper acts as a lid and will allow you to take the bat outside and release it. Never touch a bat with your bare hands, and always wear leather gloves when attempting to capture them with a box or net. Although not usually aggressive, like other wild animals bats may attempt to bite when handled.
Figure 3. Trapping a single bat.
In most cases, lethal control is not necessary or recommended. As discussed earlier, bats are beneficial and, except under unusual circumstances, destroying them is unwarranted. Many bat species occur in New Mexico, and some species are protected by state and/or federal law. Therefore, before conducting any type of lethal bat control, contact your local representative of the U.S. Fish and Wildlife Service for information on species status. Consultation with this agency is recommended to ensure proper steps are used in addressing your bat issues. For more information and ideas on bats you may also contact USDA's Wildlife Services at 505-346-2640 and Samuel T. Smallidge, Associate Professor and Wildlife Specialist, Department of Extension Animal Sciences and Natural Resources, 575-646-5944.
The use of one-way netting to exclude bats is the most simple, efficient, and effective way to batproof a building. The use of repellents and lethal control are only temporary fixes. As long as the structure remains accessible to bats, you will continue to have problems. This can only be resolved with permanent exclusion
Much of the information for this publication was adapted from:
Bat Conservation International. 2006. Bats and Building Program, www.batcon.org.
Center for Disease Control. 2006. Bats and Rabies, www.cdc.gov.
Chenger, J. 2006. Bat Conservation and Management, Inc., www.batmanagement.com.
Henderson, F.R., and C. Lee. 1992. Bats: Urban Wildlife Damage Control. Kansas State University, Cooperative Extension Service, Manhattan, KS, L-855.
Texas Wildlife Damage Management Service. 1998. Wildlife Damage Management: Controlling Bats. Texas Wildlife Damage Management Service, San Antonio, TX, L-1913.
The author also would like to thank Trish Griffin, New Mexico Bat Working Group Coordinator, John Chenger, Bat Conservation and Management, Inc., and Barbara French, Bat Conservation International, for their review and suggestions.
Original author: James E. Knight, Extension wildlife specialist. Revised by: Jon Boren and Byron Wright
The information given herein is supplied with the understanding that no discrimination is intended and no endorcement is implied by NMSU's Cooperative Extension Service.
To find more resources for your business, home, or family, visit the College of Agricultural, Consumer and Environmental Sciences on the World Wide Web at aces.nmsu.edu.
Contents of publications may be freely reproduced for educational purposes. All other rights reserved. For permission to use publications for other purposes, contact firstname.lastname@example.org or the authors listed on the publication.
New Mexico State University is an equal opportunity/affirmative action employer and educator. NMSU and the U.S. Department of Agriculture cooperating.
Revised and electronicaly distributed August 2007, Las Cruces, NM.